Within the app, find your alarm within the Device List and press “Test” button to initiate test.
Note: Test can only be initiated for Smoke + Carbon Monoxide Alarms with smart features from the Mobile Application. For Hardwire interconnected alarms, test can be initiated only by pressing the button on the device physically.
DISCLAIMER: In order to control the alarms from the app, your phone must be on the same Wi-Fi network as was used during setting up the alarm. While Test functionality is in-progress, Smoke and CO alarm notifications will be received on the mobile application from other Smoke + Carbon Monoxide Alarms in the network. Smoke and CO alarm notifications received from other Smoke + Carbon Monoxide Alarms will be cleared automatically once Test functionality is completed on the initiated Alarm. You may need to acknowledge the alarms on your Kidde Mobile app and press “All clear.”